Ozone PPB Level Meter For Safe High Precision UK Sensor Ozone Alarm Tester
Product overview
YT-96H-WH is specially designed for disinfection field like medicine clean room. It’s an online monitoring fixed ozone detector. Using imported brand electrochemical principle sensor, it’s small and light, fast response, accurate detection, reliable operation and convenient for maintenance. 24V DC power supply, standard 4-20mA, RS485 signal and a set of relay signal output. It’s non-explosion-proof design, so need to be installed in non-explosion-proof workplaces.
Product Advantages
All use imported brand electrochemical principle sensors
Standard three-wire 4-20mA analog signal, RS485 signal output
Compatible with various control panels, PLC, DCS and other control systems, can realize remote monitoring
A set of relay signals is standard equipped, and can control peripheral sound and light alarms, fans, solenoid valves and other equipment
Setting, calibration and remote monitoring can be realized by the upper software.
Ozone PPB level Meter Specification
| Detected gas: | Ozone, etc, according to customer's requirements. |
| Detection principle: | Electrochemical |
| Measure range: | 0-1000ppb, 0-1ppm, 0-5ppm, 0-10ppm, 0-20ppm, 0-50ppm, 0-100ppm, etc, according to customer's requirements. |
| Resolution: | 1ppb, 0.001ppm, 0.01ppm, 0.1ppm, 1ppm, etc, according to sensor and measure ranges. |
| Accuracy: | ≤±1-2%F.S. |
| Response time: | ≤30 seconds (T90) |
| Display: | Segment LCD |
| Shell material: | Flame Retardant Thermoplastic PS |
| Concentration unit: | ppm, mg/m3 |
| Alarm mode(Optional): | Buzzer and light, high and low alarm values can be set by customer. |
| Signal output: | 4-20mA, RS485, 1 set of relay output; 1-5VDC(optional) |
| Communication and data download: | With PC software, history data can be downloaded, stored, printed, and analyzed in computer (optional) |
| Installation method: | Wall-mounted |
| Power supply: | 24VDC |
| Language: | English |
| Humidity: | 0~95%RH (non-condensing) |
| Temperature: | -20℃~+50℃ |
| Working pressure: | 91~111kpa |
| Size: | 80.2*145*62.2mm |
| Weight: | 230g (without packaging) |
Accessories & Configuration list
Standard accessories
1. One fixed gas detector
2. One calibration cap
3. An instruction manual
4. A certificate of conformity
Optional accessoires
1. 24V DC adapter
2. Alarm light
The following points should be noted when using ozone detector
1. The "Industrial Hygiene Standard" formulated by the Ministry of Health of in 1979 stipulates that the safety standard of ozone is 0.15ppm.
2. The American standard stipulates that personnel can work for 8 hours at a concentration of 0.1ppm. (The ozone concentration in general forest areas can reach 0.1ppm)
3. The International Ozone Association stipulates that the professional indoor application of ozone is allowed to work for 10 hours at a concentration of 0.1ppm.
4. The concentration that causes a certain reaction of personnel is 0.5-1ppm, and the allowable contact time is 1.5 hours. After a long time, worker will feel discomfort such as dry mouth.
5. The concentration of 1-4ppm will cause coughing, and the allowable contact time is 1 hour.
6. The concentration of 4-10ppm will cause a strong cough, the allowable contact time is 20 minutes.
7. The half-life of ozone is 20-50 minutes, and the final decomposition product is oxygen, so there will be no residual contamination to food.
Contact information:
Celia Wu
SHENZHEN YUANTE TECHNOLOGY CO.,LTD(Safegas)
Mobile/WhatsApp/Wechat: +86 15889417475
Skype: celia.wu888
Email: sales04@szyuante.com
Product Tags:
|
|
Ozone PPB Level Meter High Precision UK Sensor Ozone Alarm Tester For Safe Clean Room Images
|
